- M22-43 is a mid scale, heavy duty wire mesh pattern where 2 individual wires share the same crimp pocket. A flared out diamond shaped facet at the intersections creates the unique detail. A very robust weave, this mesh pattern can be used for just about any application.
- The Banker Wire M22-80 architectural wire mesh pattern uses a pair of nested helical crimped wires to define the circular mesh shape. A larger scale version of M22-83, the unique reflective surfaces of the circle mesh is doubled in perfect unison.The double wire pattern adds strength to this weave and is a great option for railings, screen walls, space dividers, signage, plus many other interior or exterior design applications.
- The Banker Wire M22-83 architectural woven wire mesh pattern uses a pair of nested helical crimped woven wire to define the circular mesh shape. The unique reflective surfaces of the circle mesh is doubled in perfect unison. This pattern is slightly smaller in scale than the larger M22-80.The double woven wire pattern adds strength to this weave and is a great option for railings, screen walls, space dividers, and signage, plus many other interior or exterior design applications.
- A true basket weave! Three separate crushed wires make up the appearance of flat bands and gives it a three-dimensional shape. Low percent open area qualities give this material great cladding or visual screening possibilities.Created by one of the Weavers in the shop, this design is sure to be a classic. Consider this mesh pattern with a decorative plating finish to bring out its full texture.
- Contemporary high definition lock crimp weave with a 4.5 inch square repeat pattern. A beautiful consistent repeat pattern emerges when seen over a larger area. A perfect inexpensive railing infill or parking garage material that can be woven in a wide variety of alloys.
- A simple over-under pattern using 4 independent wires that share the same crimp pocket. Thin and strong, this wire mesh creation has unlimited design applications as either interior or exterior. At 34 percent open area, this unique weave exhibits an interesting light and shadow pattern making it a good choice for sunscreen or light diffusing applications.
- P-97 is a small scale plain crimp wire mesh pattern. This material reflects highlights from all directions with a smooth, cool wash of light. Plain crimp wire mesh is characterised by a smooth “Untouched” flowing wire woven in a gentle over/under repeat. There are hundreds of other plain crimp patterns available at Banker Wire. Call us to explore your options.When specifying a copper, bronze, or brass P-97 wire mesh pattern, it is required that a stainless steel warp wire be used in conjunction with the copper based fill wire alloy. The stainless steel wire as the warp wire creates a more architectural quality wire mesh pattern. The blending of the two alloys within a single wire mesh pattern creates a subtle colour mix that is very unique. The caramel, yellow, or red colour of the bronze, brass, and copper wires reflect off of the smooth shiny stainless wire enhancing the presentation with changing intensity depending on the viewers angle.
- Simple and delicate in appearance, the P-286 is a plain crimp weave that will forever be a classic.
- The Banker Wire PFZ-53 is a woven wire mesh specification. This rectangular weave can be woven in a variety of alloys including: Stainless Steel, Plain Steel, Stainless Steel/Brass, Stainless Steel/Bronze.
- PZ-12 is a rectangular woven wire mesh pattern that is smooth in appearance. The simple and elegant shape of the plain crimp creates a long and slow wave that is a classic in any design space. Compared to LPZ-62 which has a similar spacing and diameter relationship, it is clear to see how the various crimp styles affect the overall appearance of architectural wire mesh.
- The S-4 wire mesh pattern demonstrates Banker’s exclusive embossing technology. Completely cold-formed during the crimping process, the material constantly transitions from round, glossy surfaces to highly faceted satin surfaces. This heavy and dense wire mesh pattern will be noticed in your next project design.
- Banker Wire’s embossed technology on a small scale. Highly faceted, low percent open area, you’ve got to hold it in your hand to appreciate the beauty. This woven pattern is very robust and can be woven in stainless steel or plain steel. Secondary finishes like powder coat or decorative plating brings out its beautiful texture of our woven patterns.
- The S-30 flat wire weave is a plain crimp that has soft bends like a basket weave. The reflective flat wire attracts light and colours from its surroundings and gives it back in a unique way only woven metal can.This robust 1/4″ wide flat wire is substantial and can be used in applications where strength is needed such as railing infill panels and room dividers.
- The S-32 is a simple, small scale, flat wire woven wire mesh pattern. The smooth and gentle shape of the wires weave in and out from each other to form a basket style mesh. Using a flat wire instead of a traditional round wire at this spacing provides a mesh with a lower percent open area.
- The S-40 is a simple, flat wire woven mesh pattern with a gentle and smooth shape. The large open area of this mesh lends itself well millwork and railings. This mesh pattern can be woven in a wide range of primary finishes along with a number of secondary finishes. Square or diamond orientation, this mesh remains a classic design spanning both traditional and modern aesthetics.
- S-46 is a fine scale flat wire mesh that appears to be woven with two parallel wires. Slightly faceted at the wire mesh intersections, this mesh pattern displays a unique soft woven texture.
- S-50 is a flat wire weave created with plain crimp tooling. The simple, uncomplicated shape of plain crimp suits this flat wire and mesh spacing combination for use in just about any interior or exterior application.
- The S-51 architectural wire mesh pattern is inspired by a customer’s request to scale down the popular S-4 mesh pattern. The uniquely flattened crimp at the wire mesh intersections gives the S-51 mesh a visual detail similar to that of the S-4. The ability to precisely crush the wire effectively reduces the percent open area of the screen without adding weight.
- Uniquely flattened crimps on the S-55 wire mesh pattern gives this fine scale mesh individual oval shaped facets that appeal to the senses. Available in a number of raw materials, the S-55 can be designed with as is or, it can be further enhanced with a number of secondary finishes to bring out colour and texture.
- SJD-2 is a flagship of Banker Wire’s wire mesh customisation abilities. Banker’s precision weaving process creates this irregular mesh pattern that seems to go on infinitely, so much so that it is very hard to tell where it repeats.Featuring 18 wires over a span of just 15 inches, SJD-2 is a complex, unexpected woven wire mesh pattern. It is stable, strong, and ideal for a large variety of applications, including but not limited to, featured walls, ceilings, space dividers, and railing infill.
- Linear is a good way to describe the SJD-7 decorative woven wire mesh pattern. A strong flat top center wire is flanked by two smooth and smaller straight wires. The sleek symmetry of this wire weave will compliment any interior or exterior space.
- SJD-21 is a perfect mesh that is woven purposely to appear irregular. The well coordinated manufacture of this woven wire mesh pattern is made possible through over 100 years of weaving experience.
- SPZ-52 is a unique fine scale rectangular woven wire mesh pattern that can be woven in a wide range of alloys. Crushed warp wires and gently formed cross wires give this wire mesh a unique “Up-Close” design detail while providing a far away transparent metallic skin appearance.
- Stainless melded with bronze-aged copper, round wire melded with flat, the SZ-4 wire mesh pattern uses modern technology to create a unique weave that changes with the viewer’s angle. Available with other metal choices as well, this very strong, multipurpose fabric is an excellent choice for canopies, divider screens and railing infill panels. Bring your next project to Banker Wire, the worldwide leader in wire mesh, and we’ll help you create something extraordinary.The SZ-4 can either be woven as a mixed metal weave or in all stainless. When mixing alloys, the flat wire (Warp) must remain stainless and round wire can be either Copper, Bronze, or Brass.
- The SZ-14 woven wire mesh pattern mixes contrasting flat and round wires to create an uncommon, yet refined, composition. Elegant ribbons of flat wires weave between steadfast round wires, presenting a visual harmony that can be utilized in a variety of applications and aesthetics.
- Woven on a four heddle loom, the Banker Wire TW-1 wire mesh pattern is our first Twill weave offering. Each wire is woven in an over 2, under 2 manner creating a distinct alternating diagonal repeat pattern when viewed at an angle.The square twill wire mesh pattern opens the door to a brand new dimension in wire mesh fabrics. The densely spaced wires create a low percent open area suitable for all sorts of interior design applications.
- Banker Wire TXZ-3 wire mesh pattern utilises a 4 heddle loom to create a zigzag arrangement of both flat and round crimped wires.
- R5 T8 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- R10 T15 perforated sheet can be used in a wide range of internal and external applications, including balustrades, partitions, ceilings, fencing systems and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- R15 T21 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- R20 T28 perforated sheet can be used in a wide range of internal and external applications, including balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- R30 T40 perforated sheet can be used in a wide range of internal and external applications, including balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- C5 U16 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- C20 U25 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- C25 U35 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
- CD10 M15 perforated sheet can be used in a wide range of internal and external applications, including, balustrades, partitions, ceilings, and cladding. The panels are available in different thicknesses and a variety of finishes.Our perforated sheets are available in standard sizes or bespoke shapes and dimensions.Please contact us to discuss your requirements and next project so we can recommend the best product for your desired application.
metal solutions
© Copyright 2026 | Website designed and built by Wired Creative | All Rights Reserved | Amron Architectural
